S960 steel is an advanced low carbon and low alloy ultra-high strength steel (with a
minimum yield strength of 960 MPa) developed by Tata Steel. At present, there is a scarcity …

Objective: To analyse the statements given by tobacco industry defence witnesses during
trial testimonies and depositions in second-hand smoke cases and in parallel, to review …

Lack of penetration, undercut and melt sagging are common welding defects for single-pass
laser welds in thick plates, particularly when using a traditional 1G welding position (laser …

SA508 steels are typically used in civil nuclear reactors for critical components such as the
reactor pressure vessel. Nuclear components are commonly joined using arc welding …

Welding is an important process used during the construction and maintenance of nuclear
reactor components. Welding results in residual stresses, distortions and microstructural …

Reduced-pressure electron beam plate butt welds were manufactured in two low-alloy
pressure-vessel steels, SA508 Gr 3 Cl 1 and Gr 2, at two thicknesses in both steels, 30 mm …

Background Since the passage of Proposition 99, California9s comprehensive tobacco
control programme has benefited from a localised policy adoption process that allows for the …

A study of the tensile behaviour of test coupons that were extracted from cast plates of D357
aluminium is described. The effects of specimen thickness, heat treatment, structural integrity …

S960 and S700 are two new high strength steels recently developed by Tata Steel, UK. Due
to the high power densities that can be achieved, small component distortion, and fast …

A thermal-metallurgical-mechanical model was developed to study the effects of dilution in
each weld pass for multipass gas tungsten arc and submerged arc welding in low alloy steel …